搜索资源列表
uCOSII_FS44b0x
- 1）通过fs44b0xbios和网口，将upload里的boot.bin烧写到flash 0 地址 见“FS44B0Xbios使用指南”之5 2) 打开57600超级终端 3) 连上串口线和jtag调试头 4）打开FS44B0X开发板电源 5）运行jtag.exe,在SDT下调入 ucosii_demo.axf，运行 6) 在超级终端上有三个任务的运行与退出显示，板子上的三个发光二极管会来回闪烁。 -a) fs44b0xbios and LAN, li will
S3C44B0X例子程序1
- 5 ledblink -- 跑马灯程序 该项目在SDT2.51下编译调试。最简单的demo程序，运行后3个发光二极管轮流点亮。 6 timerint -- 定时器中断demo程序 该项目在SDT2.51下编译调试。将子目录timerint拷贝到c:\\ 下。 该demo程序的主程序是while空循环，定时器中断服务程序每500ms将3个LED反相。 在57600超级终端里也可以看到中断发生时的信息。 7 uart -- 串口测试程序 该项目在SDT2.5
AT91RM9200-BasicISO7816-ARM1_2-2_0
- This zip describes an ISO7816 configuration to read the ATR. Includes main.html file for help. For use under Green Hills 3.6.1 Multi?2000 Software Tool. -This describes an ISO7816 configurati read on to the ATR. Includes main.html file for h E.coli.
AT91RM9200-BasicSPIDataFlash
- This zip describes SPI communication with a Serial DataFlash AT45DB and/or with a DataFlashCard AT45DCB. It shows how to configure the SPI peripheral on the AT91RM9200EK. Includes main.html file for help. For use under Green Hills 3.6.1 Multi?2000 So
AT91RM9200-BasicUSARTPDC-GHS3_6-2_0
- This zip describes an AT91 USART with PDC Transmission and Reception chain.Includes main.html file for help. For use under Green Hills 3.6.1 Multi?2000 Software Tool. -This describes an porting USARTs with PDC Tr ansmission and main Reception chain.I
MPC8270-EXT-v10
- CPU MPC8270 SDRAM K4S561632 x4(128Mbyte) BOOT FLASH AM29LV640(8MByte) Nand FLASH 兼容三星的K9F系列的FLASH CPU JTAG口 核心板集成 串口 3个 SMC1、SMC2、SCC1 （SMC1扩展板和核心板都有输出接口） 以太网口 3个 FCC1、FCC2、FCC3 可编程发光二极管 6个 可编程发光数码二极管 1个 系统外部中断输入 4个 外部系统复位输入 1个
MpZBeeV1.0-3.6
- microchip公司的ZIGBEE协议源代码，安装后即可看到源代码的C语言文件-microchip companies ZIGBEE agreement source code, After installation can see the source code in C language documents
AT91RM3400-MCK-GHS3_6-1_1
- This zip file describes how to generate a clock on the PCK pin using the PMC running under AT91RM3400DK with Green hills 3.6.1 Multi® 2000 Software Tool. Includes main.html file for help.
STM32-Lib_V3.5.0-SDPFATFS0.09
- 基于STM32F103ZET6 的神舟III号开发板的 SD+FATFS0.09 IAR EWARM 6.1工程 基于官方3.5库-Based on the STM32F103ZET6 the Shenzhou III development board, the SD FATFS0.09 the IAR EWARM 6.1 works based on the official 3.5 library
第3章－μCOS-II基础实验
- 第3章－μCOS-II基础实验 3.2－GPIO实验 3.3－时器实验 3.4－PWM实验 3.5－RTC实验 3.6－信号量使用-Chapter 3- COS-II experimental basis 3.2-GPIO experimental 3.3- 3.4 at the experimental device-PWM experimental 3.5-RTC experimental 3.6-volume use of signals
sqlite
- 在GEC2410平台上的编译应用SQLite-3.6.7的全过程和源代码-In GEC2410 platform SQLite-3.6.7 compiler application of the entire process and source code
3
- （嵌入式课件）第6讲 ARM体系结构 -(Embedded Software) Section 6 stresses ARM architecture
3-6
- c8051F040 ADC0监控中断调试程序-c8051F040 ADC0 interrupt monitor debugger
skyeye-1.3.2_rc1
- skyeye 模拟器下 的 linux-2.6.14 含LCD cs8900a（driver/net/arm/cs8900-end.c是最终版） 已修改arch/arm/kernel/module.c 以支持insmod 驱动 kernel/resource.c文件添加I/O读写函数-skyeye simulator under linux-2.6.14 -with LCD cs8900a (driver/net/arm/cs8900-end.c is the final version) ha
efsl-0.3.6.tar.bz2
- FAT12 FAT16 FAT32 Atmel
9-3.6
- 飞思卡尔智能车，中期可使用程序，使用飞思卡尔官方设定-Freescale smart car
WPhoneS1.3.6
- STM32 +W5100+cmx7261 构成的网络语音解码编码模块， 包含各头文件和mian函数。-Network voice codec module STM32+W5100+cmx7261 composition, including the header files and Mian function.
STM32_USB-FS-Device_Lib_V4.0.0
- stm32系列的库文件，包括f10,f30,f37,l1xx版本。其中usb库为最新的4.0版本，外设库为3.6版本。均为最新。
fftw-3.3.6-pl2.tar
- FFT Library for ARM cortex M3
Lab 6 UART_RS232
- 基于MSP430f5529的串口程序，能在墨水版上输出(We will use USCI_Ax module with UART mode, Timer_A module, and TFT display. 1. Configure UART mode 2. Initialize E-ink screen (TFT) display 3. Configure Timer_A for interrupt Transmit one character through UART every o