搜索资源列表
LPC2_CANBlinky_V130
- The following Philips LPC2k CAN examples in this directory were provided by ESAcademy. LPC2_CANAll_V110: Receives all CAN messages in a receive queue. LPC2_CANFull_V110: Uses Full-CAN-like reception filtering. LPC2_CANBlinky_V130
LPC2_CANAll_V110
- The following Philips LPC2k CAN examples in this directory were provided by ESAcademy. LPC2_CANAll_V110: Receives all CAN messages in a receive queue. LPC2_CANFull_V110: Uses Full-CAN-like reception filtering. LPC2_CANBlinky_V130
LPC2_CANFull_V110
- The following Philips LPC2k CAN examples in this directory were provided by ESAcademy. LPC2_CANAll_V110: Receives all CAN messages in a receive queue. LPC2_CANFull_V110: Uses Full-CAN-like reception filtering. LPC2_CANBlinky_V130
S3C44B0Xcomm
- 通过讨论常见的串口软件使用的方法，提出基于一种称之为双缓冲队列的串口缓冲区管理策略的串口软件模块的实现方法和其中要注意的问题。-through discussion of the common use of serial software, Based on the call a double-buffer queue Serial buffer management strategy Serial software modules and the method to which attenti
Demo2_UART_1017
- 凌阳SPCE06的语音通信代码,利用了双缓冲队列,是学习的好例子,希望很大家一起分享-Sunplus SPCE06 voice communications code, the use of the double-buffer queue, is a good example of learning, hope to share with everyone
LPC1768_UART0
- LPC1768串口（UART0）收发任意数据（带数据队列）-LPC1768 serial port (UART0) receive any data (with data queue)
hffmancode
- hffmancode队列的插入删除处理 -insert delete hffmancode queue handle
UDiskDemo
- 文件及文件夹说明 =============================================================================================== \arm\ uC/OS-II移植代码 \SOURCE\ uC/OS-II源码保存在该文件夹 \HostMassLib\ HostMassLib驱动库相关文件存放的文件夹 \HostMassLib\读写U盘模块驱动使用手册.pdf 驱动库使用手
MCP2515_driver_s3c2440based
- 本驱动程序在s3c2440上实现了两路基于SPI的CAN总线控制器。两通道可以并行，并使用外部定义的两个信号量来通知接收任务收到CAN总线帧，并将其存入预先定义的队列中（帧定义在CAN总线控制器驱动程序的头文件中）。CAN总线控制器的中断引脚分别连接到ARM的EINT3和EINT8_23上-The driver s3c2440 achieved a two-way SPI-based CAN bus controller. Two channels can be parallel, and us
filter
- 实现按键的滤波以及按键FIFO队列的处理。systick配置为1ms中断，在中断服务程序实现所有按键的检测滤波。-Push button FIFO queue filtering and processing. systick configured to 1ms interrupt, the interrupt service routine testing to achieve all the key filter.
lpc2132_dome
- lpc2132演示程序,同样是基于硬件FIFO和缓冲队列的串口收发演示-lpc2132 demo program, also is based on the hardware and buffer queue FIFO serial transceiver demo
easyarmI2C
- easyARM2200开发板的实验例程，实现了IIC通信和IIC队列-easyARM2200 development board test routines, implementation of the IIC and the IIC communication queue
stm32_code
- stm32 完整工程，强大的消息处理应用模板，这是杰出的嵌入式资深软件工程师的贡献。-stm32 complete construction, powerful messaging application templates, this is an outstanding senior software engineer embedded contributions.
xbee-zigbee-LPC2142-gcc
- This embedded system was designed to work with xbee-zigbee modules using API mode, through the serial por (UART0 and UART1). The microprocessor is an ARM LPC2142, it compiles using gcc. All the makefiles are included. A cross compiling tool is needed
5.2
- ARM 实现队列 ARM 实现队列 ARM 实现队列 -Implementation to achieve queue queue ARM ARM ARM ARM implementation to achieve queue queue queue ARM ARM implementation to achieve queue
5.3
- ARM 实现队列 ARM 实现队列 -Implementation to achieve queue queue ARM ARM ARM ARM implementation to achieve queue queue
IPC_MSGCLIENT
- EVC 进程间通讯的客户端源码，使用的是S3C2440 ARM9处理器，使用消息队列进行通信。-EVC client inter-process communication source, using the S3C2440 ARM9 processor, use the message queue.
IPC_MSGServer
- EVC 进程间通信，服务器端远吗，使用的是S3C2440单片机，ARM9处理器，使用消息队列通讯。-EVC inter-process communication, server-side far behind, using S3C2440 microcontroller, ARM9 processor, use the message queue communications.
queue
- queue driver source file for freescale kinetis mcu.
Msp430UartTXorRX
- 串口环形队列接收和发送程序，基于MSP430-Serial circular queue receive and transmit procedures, based on MSP430