搜索资源列表
ucos-arm移值实例代码.tar
- ucos在ARM7系列cpu上的移值代码，主要修改了3个文件。-CENTER ARM7 family cpu in the transplant code, the main change the three documents.
uClinux-20040408-ARMSYS
- uClinux-20040408-ARMSYS-A embeded uClinux system for ARM cpu family. uClinux is a embeded OS for embeded system.
UCOS2.71souce
- 含代码UCOS_II测试程序说明有详细过程说明 测试步骤 1> 开发板上电 2> 运行串口监视软件,波特率115200,8N1 3> 运行测试程序 4> 在串口监视软件中显示OSRunning后，最右侧的LED灯开始闪烁， 间隔为1秒。同时每隔2秒可以在监视窗口中看到当前CPU利用率。 按下某个键后，会在监视窗口中看到诸如“msg = x”的信息。-containing code UCOS_II test a detailed de
SleepTimerWakeup
- SleepTimerWakeup 定时中断唤醒CPU的范例-SleepTimerWakeup awaken periodically interrupted CPU model
microwindows-0.90_arm2410
- the embedded GUI for SamSung s3c2410 cpu based board.is microwindows0.90-the embedded GUI for SamSung s3c2410 cpu ba sed board.is microwindows0.90
linux24-dpm.tar
- Linux 2.4 内核下动态电源管理（Dynamic Power Management）的源代码，基于Jz4730 CPU的一个实现，支持动态变频，睡眠和唤醒，具有很大参考价值。-Linux kernel 2.4 Dynamic Power Management (Dynamic Power Manage ment) of the source code, based on the CPU Jz4730 a realization that support Dynamic Frequency,
BSD_ixp400AccessLibrary-2_3
- intel IXP400系列cpu（2.3版）的库文件，包括微码，access layer和上层，所有的软件。 适合于做基于ixp400开发的人员-intel cpu IXP400 Series (version 2.3) of the library, including micro-code, access layer and the upper-class, all software. Suited to do based on the development of the staff
fs44b0ic
- ic智能卡驱动，符合ISO7816协议，通过APDu测试，uClinux下驱动，cpu：s3c44b0x-ic smart card-driven, with ISO7816 agreement through APDu tests Drivers under uClinux, cpu : s3c44b0x
AT91SAM9261-BasicLCD-IAR4_30A-1_1
- GPS 导航器TFT 驱动源程序。主CPU为ATmel的AT91sam9261（ARM926的内核）-TFT GPS navigation device driver source code. CPU for the AT91sam9261 ATmel (ARM926 the kernel)
tvp5150
- tvp5150视频编解码芯片驱动程序，cpu通过i2c控制该芯片，将驱动程序放入driver/i2c/chips目录下，并且在makefile文件中加入该驱动编译即可。-tvp5150 Video Decoder Chip driver, cpu through i2c control of the chip Add to Driver driver/i2c/chips directory, and the makefile to accede to the document can be dr
cfe-1.3.3-src
- This directory contains Broadcom s Broadband processor division \"Common Firmware Environment,\" or CFE. (pronounce it cafe if you like) It is intended to be a flexible toolkit of CPU initialization and bootstrap code for use on processo
ARM-MCU-INI-SCRIPT
- 三星arm cpu开发资料，资料详尽，供开发者参考！-Samsung arm cpu development information, detailed information for the development of reference materials.
spi_slic_driver
- linux下的SPI总线驱动程序，CPU是RTL的86系列，以legerity的SLIC chip为驱动对象。供大家参考。-linux under the SPI bus driver, the CPU is the RTL 86 series, legerity to the SLIC chip-driven targets. For your reference.
led_on_c
- 测试ARM9的cpu很有用！！！ 可以帮助你迅速排除cpu的故障-test ARM9 cpu useful! ! ! Can help you rapidly eliminate cpu Fault
sysinfo_for_e2
- moto e2的实时系统概况的源码，使用了qt界面，可以显示当前cpu、内存、和数据状态，使用arm-linux-gcc编译，并且要搭建相应的qt环境
Diag_Intel_IXP2400
- 开发Inetl IXP2400平台所必须的硬件诊断和测试程序。该软件包支持的功能包括CPU基本功能检测，串行通讯测试，以太网测试，DDR测试，QDR存储器测试，PCI总线检测等等。
uda1341
- 基于linux kernel 2.6.20的UDA1341声音芯片的声卡驱动，在s3c2410 cpu下调试通过。 使用方法:源码树的根下新建local目录，并将其解压缩到该目录，修改源码树根下的Makefile文件的559行为： vmlinux-dirs := $(patsubst ％/,％,$(filter ％/, $(init-y) $(init-m) $(core-y) $(core-m) $(drivers-y) $(drivers-m) $(net-y) $(ne
ReadCardDLL
- 嵌入式开发中,CPU卡和存储卡的读写操作 函数库.基本涵盖所有卡的读写.-Embedded development, CPU card and memory card reading and writing library. Basically covers all the card reader.
cpu-curved-shape
- 这是一篇介绍cpu使用情况的编程测试学习文档。里面有可执行的源代码实例，让你能够真切快速地了解CPU的便用与代码的关系，从而养成注重代码时空复杂度的好习惯。-This is an introductory programming test cpu usage study documents. There are instances of the executable source code, so you can truly understand the CPU will be fast and
CPU--GPUtemperature
- python树莓派查看CPU、GPU温度 在Terminal中输入Python temp.py-python Raspberry Pi view CPU, GPU temperature input in Terminal in Python temp.py