搜索资源列表
uIP运行于8位-16位单片机上TCPIP协议源码0.9
- uIP运行于8位-16位单片机上TCPIP协议源码0.9 我自己做过的 很好的 希望与大家爱好者分享-Application of ulP runs on eight 16-bit microcontroller agreement on the source of 0.9 TCPIP I done good and we hope to share lovers
8位液晶屏LCM0825
- 8位液晶屏LCM0825的点亮源代码，本程序是从0到9循环显示，可以改变参数输入任意值。-eight LCM0825 LCD lit the source code, the procedure is 0-9 circle that can change parameters into arbitrary value.
VHDL实现简单的8位CPU2
- 用VHDL实现8位的单片机！里面 有开发过程和代码阿！很详细的哦-using VHDL eight of SCM! Inside the development process and code Ah! Detailed oh
8位C51CRC校验原程序
- 8位C51，CRC校验原理单片机编程原程序-eight C51, CRC principles SCM original programming procedures
uip-1.0.tar
- TCP/IP 协议栈 ，用于8/16位的各种MCU中，支持各种操作系统-TCP / IP protocol stack for 8 / 16 of MCU, support various operating systems
luojifenxiyi
- 逻辑分析仪 PC发送到单片机的命令共7个字节： 第一字节是触发信号，每bit对应一路信号，1为高电平触发，0为低电平触发； 第二字节是触发有效信号，每bit对应一路信号，1为忽略，0为有效； 第三、四字节是采样时间，对应如下： 2us=0x0402，5us=0x0a02，10us=0x1402，10us=0x2802，50us=0x6402，100us=0xc802，200us=0x3203，500us=0x7d03，1ms=0xfa03，2ms=0x7d04，4ms
Varitronix-2.8-lcd.rar
- Varitronix公司的2.8寸TFT液晶屏手册和初始化源码,对想用2.8寸屏的是不错的参考.,Varitronix company s 2.8-inch TFT LCD screen and manual initialization source of want to use 2.8-inch screen is a good reference.
HI_TECH_PICC9.8(install_crack)
- 上传的是HI-TECH 的PICC9.8版本的安装软件，带有破解，有详细说明，很好的PIC单片机编译工具！-From the HI-TECH' s PICC9.8 version of the installed software with crack, are detailed, very good tool for PIC microcontrollers compilation!
8×8LED
- 8×8点阵LED显示,基于单片机的人机接口的设计，硬件设计及软件仿真，用到的软件是PROTEUS KEIL-8 × 8 dot matrix LED display, based on single-chip human interface design, hardware design and software simulation software is used PROTEUS KEIL
redsn0w-win_0.8
- Redsnow app - used to hack the iPod 3.0 firmware-Redsnow app- used to hack the iPod 3.0 firmware. You will need to already have the firmware downloaded.
ADF4360-8
- 单片机控制锁相环芯片adf4360-8产生高频信号的程序。-SCM control phase-locked loop chip adf4360-8 high-frequency signals generated program.
PICC18-8.35
- PICC18-8.35 PICC18-8.35.rar-PICC18-8.35.rar PICC18-8.35.rar
ST7735_V1.8
- 本程序是基于STC89S52，用其控制ST7735_V1.8彩屏，并使其显示时钟。-This procedure is based on the STC89S52, with its control ST7735_V1.8 color, and to display the clock.
1.8-33bf
- 单片机和1.8寸TFT显示屏程序，非常有用，-And 1.8-inch TFT display microcontroller program
HC6800v2.8
- 普中科技51单片机开发板HC6800EV2.8的配套说明文档，pdf格式。-Science and technology in general 51 MCU development board HC6800EV2.8 supporting documentation, pdf format.
WinAsm-5.1.8.7
- WinAsm.5.1.8.7 IDE 集成开发环境源代码-WinAsm.5.1.8.7 IDE integrated development environment for source code
mmc_high_speed_mode_setting_sequence_v1.0
- Normal MMC operates under 20 MHz and can operate 1 bit data, but High Speed MMC can operate from 0 to 52 MHz. Also it can operate 1 bit to 8 bit data Even though High Speed mode setting is defined in MMC specification 4.x, most application manu
8-x-8-dot-matrix
- 8*8点阵的设计，内涵全过程，用的是2864，以及一些简单的74系列芯片设计的，大二数电的课程设计-8 x 8 dot matrix
FreeRTOS_8.0.0_STM32_Template
- FreeRTOS 8.0.0 移植到 STM32F103 的空工程模板。-FreeRTOS & STM32F103
ST7735S 1.8寸LCD-STM32F103C8测试程序
- 基于STM32F103 驱动 1.8寸TFT屏（芯片ST7735S），已测试验证OK(1.8 TFT ST7735S driver , write by STM32F103)