搜索资源列表
ch3-ex
- 单片机C语言嵌入式/单片机编程 Keil C51 uV2使用程序开发！
CH375_M128.rar
- 使用ATMEGA128加CH375对U盘扇区进行读写,本程序在ICCAVR上调试,并在相应硬件电路上调试通过!供参考用,ATMEGA128 increase the use of U disk CH375 sector to read and write, the process ICCAVR debugging, and hardware in the appropriate circuit debugging through! For information
CH375_AVR_USBMouse
- 使用MEGA16+CH375实现的USB鼠标。程序注释完善，方便初学者学习USB和AVR单片机。-Achieved using MEGA16+ CH375 USB mouse. Program note perfect, easy for beginners to learn USB and AVR microcontroller.
CH376
- 51单片机的CH376SPI驱动，演示成功过的-51 MCU CH376SPI drive, a successful demonstration before. .
ch376
- 单片机数据写入U盘，上位机以txt文档读出。 以下是自己修改过的主程序。 -U MCU data is written to disk, host computer to read txt documents. The following is a modified main program itself.
CH372
- 本程序测试数据传输的正确性,可以用于长时间连续测试,基于MCS-51单片机C语言的示例程序,用于其它单片机时一般只要修改前面几个接口子程序及硬件定义-This procedure tests the validity of data that can be used for a long time for the test, based on the MCS-51 single-chip sample C language program, normally used for other sin
ch3
- 实现89c51计数器功能，按钮开关控制七段数码管的数值显示-89c51 counter function button switch control seven-segment numerical display
1.PWM_F1
- 要使STM32的通用定时器TIMx产生PWM输出，我们会用到3个寄存器，来控制PWM的。这三个寄存器分别是：捕获/比较模式寄存器（TIMx_CCMR1/2）、捕获/比较使能寄存器（TIMx_CCER）、捕获/比较寄存器（TIMx_CCR1~4）。（注意，还有个TIMx的ARR寄存器是用来控制pwm的输出频率） 首先是捕获/比较模式寄存器（TIMx_CCMR1/2），该寄存器总共有2个，TIMx _CCMR1和TIMx _CCMR2。TIMx_CCMR1控制CH1和2，而TIMx_CCMR2控
pulse
- 可再生模块软件解码，使用STM8S103的TIM2，CH3-soft decode form RF module,using tim2,ch3 of stm8s103 MCU.
STM32input-ccPB8TIME4CH3
- STM32 输入捕获TIM4 CH3 PB8，可以测试脉宽。-stm32 input cc time4 ch3 pb3 test.it can test pluse width.
pid
- 基于stm32的寻迹小车PID算法解析 开发目标1：TIM1的4个通道生成PWM，CH1—PWM1 CH2—PWM2 CH3—PWM3 CH4—PWM4 TIM8的4个通道生成PWM，CH1—PWM5 CH2—PWM6 CH3—PWM7 CH4—PWM8 开发目标2：TIM7作为定时器中断，产生固定的时间间隔，便于计算电机及落地码盘的速度（单位时间间隔脉冲增量） 开发目标3：TIM2、TIM3、TIM4、TIM5作为编码器接口，读取编码器