搜索资源列表
ucos port forf240
- uC/OS-II 在TI TMS320C240上的移植代码-Phone / OS-II in TI's TMS320C240 transplant code
uCOS276andTCPIP
- ucos_ii在44b0上移植，包括lwip的移植，跑在远峰公司的板子上，驱动有点不好-ucos_ii 44b0 on the transplant, including lwip transplant, in the far-run company's board, a little bad drivers
cszpingtai
- 一个UCOS操作系统在W77E58单片机上的移植实例，并附有文档说明等，很不错的 -An example of ucos operating system port to the W77E58 singlechip computer ,including manuals,it s very good
QueueDriver
- uc/osII平台下一个队列数据结构的源代码实现，该代码可以直接应用到用户的程序中而无需做任何改动。-uc / osII platform under a queue data structure to achieve the source code, the code can be applied directly to the user's proceedings without any changes.
ti-c2xx
- This code ports the uC/OS operating system by Jean LaBrosse to the TI TMS320C2xx family of DSP s.-This code ports the uC / OS operating system by Jean LaBrosse to the family of TI DSP TMS320C2xx s.
UcOsii_all
- UcOs ii的多任务操作系统全部原代码 包含这些cpu的原代码： 8051 68H11 8088 AVR XA 196 TI DSP 54XX ARM C167 68H12 68000 SH3 -UcOs ii multi-tasking operating system source code contains all these cpu's original code : 8088 8051 68H11 AVR 196 XA TI DSP 54XX ARM C167
uCOS-II_WIN32_LINUX_2.1
- UCOSII的PORT代码。真是麻烦呀，这下行了吧-UCOSII the code. Trouble is, that's where initials
ucosip
- 基于UC/OS II操作系统的TCP/IP协议的移植源代码。-on UC / OS II operating system's TCP / IP protocol source code for the transplant.
style_news
- asp源程序一个网站的首页面版，我看了看还是觉得不错的，你也可以试试看．-asp source of a site-Home Edition, I can read or think it's good, you can give it a try.
ucosii_lh79524
- 在LH79524平台上移植ucos的代码，开发板自带的，可直接运行在该平台上。-platform transplant CENTER code, the board's own, can be run directly on the platform.
uCos-II for x86
- uCos-II for x86嵌入式操作系统-It s some transplan exaples for x86 about uCOS.
uCOSIIinLPC210X
- 关于 uC/OS-II 在 LPC210X 上移植的说明 1. 全部代码在 ADS1.2 中编译调试. 2. 您可以更改 RO BASE 为 0x0000 0000, 这样可以将代码写入 flash 中运行. 5. 全部代码采用 ARM 指令. 6. uC/OS-II 版本为 V2.52. 7. 当您暂停程序的时候, 如果定时器开着, 那么定时器并不会暂停,需要注意 8. Vectors.S 文件中的 startup 段为程序入口. 9. 编译时下面的警告不必理会.
ADSucos_lib
- 在移植成功ucos核的基础上扩充了该操作系统的许多没有功能。如文件系统，tcp/ip协议栈，GUI等，非常实用。也是前面前几个源码所用库文件的源码程序。-success of the transplant OUT nuclear expansion on the basis of the operating system's many functional. If the file system, tcp / ip protocol stack, the GUI, is very pra
USB_ON_s3c2410
- 基于三星公司的ARM处理器S3C2410的USB传输系统的实现。内部已经移植了UCOS操作系统。-based on Samsung's S3C2410 ARM processor the USB transmission system is achieved. Internal UCOS has ported the operating system.
ucOS-II-GPRS
- ucOS-II应用源码：通过对串口编程来控制GPRS扩展板，实现发送固定内容的短信，接打语音电话等通讯模块的基本功能。利用开发平台的键盘和液晶屏实现人机交互。-ucOS-II application source : Serial Programming right to control the GPRS expansion boards, achieve this fixed content of the messages, then fight voice telephone communi
ucos_view_ucos283
- RTOS版本：uCOSII V2.83 OSView版本：uCOS_View 1.10 开发环境：KEIL 编译器：ADS1.2 开发板：EasyARM2200 内部FLASH运行，Bank0=ExFlash Bank1=ExRAM 调试口：Uart0 57600bps 目前在OS_CPU_A.s里的OS_CPU_SR_Save OS_CPU_SR_Restore函数没起作用，功能是开关中断，用仿真器看时会发现根本没关中断，解决办法是切换模式再操作，懒得去看ARM汇编，不
ucosii2
- 修改了其它人的ucosiifor44b0见博客 http://blog.sina.com.cn/bufengmobuchenghuo-revised the other person's blog ucosiifor44b0 see http : / / blog.sina.com.cn / bufengmobuchenghuo
GCCandtheMicroCOS-II
- Real-time processing with the Philips LPC ARM microcontroller using GCC and the MicroC/OS-II RTOS.-Real-time processing with the Philips LPC ARM microcontroller using GCC and the MicroC / O S-II RTOS.
uCOSII000000
- 本人s12的一部分机器人巡线程序，仅供大家参考，谢谢各位的指点-I am part of s12 line robot patrol procedures, only reference to U.S. Thank you for pointing
SteppingMotor_PWM_Adc_DMA(S加速_开漏输出)
- 具有按键、LED显示、ADC等功能，采用PWM控制步进电机(With buttons, LED display, ADC and other functions, the use of PWM stepper motor contro)