搜索资源列表
uCOS_II在TMS320LF2407demo板上的移植
- uCOS_II在TMS320LF2407demo板上的移植.压宿包一个,还是不错的-uCOS_II TMS320LF2407demo board in the transplant. Pressure places a package, or good
uC_OSII
- uC_OS-II在Keil C上的移植代码，注意此代码使用与KeilV6.20及其以上版本。-Keil C portal of uC/OS-II source code. Note: this code is for Keil V6.20 or later version.
CS_MPFS
- 将网页转换成数组，放于c代码中，建立Webserver时可以用到。-website will be converted into an array, or in c code, the establishment of Webserver can use.
ucosII_ARM7_9
- μC/OS-II and ARM Processors (For ARM7 or ARM9) (For ARM and Thumb Mode) Application Note,里边有很多源码和例子，非常好！
TC3_ucos2_ucgui
- Turbo C 3.0 + UCOS2 + UCGUI PC学习版本， 在csword网友的基础上改正了一个BGI的小问题，并 加入了IDE环境：Turbo C++ 3.0 带路径直接解压到到D:\\根目录就能用， 解压后，请运行d:\\myworks\\tc\\tc.exe 而后打开项目选择d:\\myworks\\tc\\bin\\ucgui\\ucgui.prj 而后按Ctrl+F9下运行即可。 注意运行后在WinXP全屏下会没有响应， 建议在Vmware下
style_news
- asp源程序一个网站的首页面版，我看了看还是觉得不错的，你也可以试试看．-asp source of a site-Home Edition, I can read or think it's good, you can give it a try.
ucosii-8051
- uc/os-ii for 8051 This package provides the sources required to use the uC/OS-II v2.00 real time kernel on the 8051 processor. To use this package you will need the TASKING C Compiler toolset v6.0r1 or higher. For info on TASKING products
ucOSII_Tran
- 系统移植 AEDK EMB33实验系统，GWB33软件或者Eclipse软件环境-transplant system AEDK EMB33 experimental systems, GWB33 software or Eclipse software environment
MCS5_uCOC_II
- 移植到MCS51的uCOS_II。 1。在文件OS_CORE.C中OSMapTbl和OSUnMapTbl数组用于查表，所以应该放在code里。 增加code关键字。UCOS_II.H和OS_CORE.C。 2。OS_CFG.H堆栈大小MaxStkSize改为900。 3。OS_CPU_C.C的InitTimer0函数增加了关于开T0中断的解释。 允许T0中断，此时EA=0(51上电缺省值)，中断还不会发生，满足在OSStart()前不产生中断的要求。
9200UCOS
- 移植文件针对中断处理部分作了处理，支持中断嵌套！（重新编译若出现错误，请删掉原编译的文件，后重新编译或者删掉工程文件后，重新利用源码文件建立新工程文件即可！）-portable document against interrupt handling of processed, nested interrupt support! (Recompiled if there is a mistake, please delete the original translation of document
s3c44b0chumoping
- 当手指或笔触摸屏幕时，平常相互绝缘的两层导电层就在触摸 点位置有了一个接触，因其中一面导电层接通X轴方向的5V均匀电压场(图a) ，使得检测层的电压由零变为非零，控制器侦测到这个接通后，进行A/D转换 ，并将得到的电压值与5V相比即可得触摸点的X轴坐标为（原点在靠近接地点 的那端）：Xi=Lx＊Vi / V（即分压原理）同理得出Y轴的坐标，这就是所有电 阻技术触摸屏共同的最基本原理。-finger or pen to touch the screen, usually two
NEC-78K4-V100-FOR-uCOS-II-V252.ZIP
- Note that only the PORT is provided and it is assumed that you have the rest of the source for µ C/OS-II from the book or the upgrade. -Note that only the PORT is provided and it is assumed that you have the rest of the source for
uCOS2
- The uC OS-II port for Keil C V6.20, V6.21 or higher-The embedded OS-II port for Keil C V6.20. V6.21 or higher
464
- μC/OS-II and ARM Processors (For ARM7 or ARM9) (For ARM and Thumb Mode) Application Note
GausCoor坐标转换
- 坐标转换程序，可用于经纬度坐标转大地坐标或大地坐标转经纬度坐标！-coordinate conversion process can be used to turn longitude and latitude coordinates of the earth coordinates or geodetic coordinates of latitude and longitude coordinates turn!
uCOS-II到 C51单片机下的移植
- 嵌入式操作系统ucos在51单片机上的移植，很有实用价值，参考这个程序也可以把ucos轻松的移植到其它mcu或arm及dsp上-embedded operating system in the SCM 51 transplant, useful, reference to this procedure can also CENTER easily ported to other mcu or on the arm and dsp
embedded system paper1
- 介绍几种cpuThe 8xC251SA/SB/SP/SQ improves on the MCS-51 architecture and peripheral features, introducing the advanced register based CPU architecture i.e., the MCS 251 microcontroller architecture. The register based CPU supports a 40-byte register file
EX1_x86L
- 一个UCOS下的经典例程，用BC4.5编译（也可以运行MAKETEST），如果你用的BC3或者其它版本的话，把目录强行改为BC45就可以了.-a UCOS the classic routines with BC4.5 compiler (also can run MAKETEST), if you use other versions or BC3, then what Contents forced to Cooking on it.
EX2_x86L
- 一个UCOS下的经典例程，用BC4.5编译（也可以运行MAKETEST），如果你用的BC3或者其它版本的话，把目录强行改为BC45就可以了.-a UCOS the classic routines with BC4.5 compiler (also can run MAKETEST), if you use other versions or BC3, then what Contents forced to Cooking on it.
EX3_x86L
- 一个UCOS下的经典例程，用BC4.5编译（也可以运行MAKETEST），如果你用的BC3或者其它版本的话，把目录强行改为BC45就可以了.-a UCOS the classic routines with BC4.5 compiler (also can run MAKETEST), if you use other versions or BC3, then what Contents forced to Cooking on it.