搜索资源列表
v-2.76
- AT91RM9200-UC/OS-II,clock,irq,usart,pio等驱动
USART
- 使用ST标准库，加载uC/OS II,添加3个任务，通过串口输出CPU使用率的C源代码。CPU为STM32F103RBT6，串口为USART1-Using the ST standard library, add uC/OS II, add three missions, through the serial output of CPU utilization of C source code. CPU is STM32F103RBT6, serial for the USART1
AT91SAM7X256_USART_test
- 一个AT91SAM7X256 USART驱动实验，硬件环境为at91sam7x-ek开发板，开发环境为iar。-An experimental AT91SAM7X256 USART driver, hardware environment at91sam7x-ek development board, development environment for iar.
GENIE-SHELL
- uCOSII只提供了操作系统内核，用户要自己添加文件处理、人机界面、网络接口等重要部分。其中Shell(人机界面)提供了人与机器交互的界面，是机器服务于人的体现，是系统必不可少的重要组成部分。现代的很多OS如UNIX、DOS、VxWorks都提供了友好的命令行界面。Windows更是提供了GUI。大部分人认识OS都是从这里开始的。 由于Skyeye下的仿真串口USART已经实现了中断方式的接收（实际是从键盘接收输入），而且串口输出（实际上是输出到终端屏幕）也已经实现，所以实现一个类似DOS或
STM32R100DevelopBoardSourceCode
- stm32 ADC,CAN,DMA,Flash,LED,library,NVIC,Project,PWR,RCC,Blinky,SPI,TIM,USART-stm32 ADC,CAN,DMA,Flash,LED,library,NVIC,Project,PWR,RCC,Blinky,SPI,TIM,USART
USART
- 在万利199元开发板上实现了uCOS-II移植到STM32的操作，建立了LED闪烁任务以及USART1向计算机发送数据的任务。-Manley 199 yuan in the development board implements the STM32 uCOS-II ported to the operation, the establishment of the task and the LED flashes USART1 send data to the computer task.
USART
- 基于ST公司低功耗产品STM32F103ZET6的红牛ARM开发板通用异步收发器（USART）程序。-Based on ST' s low power consumption of Red Bull products STM32F103ZET6 ARM development boards Universal Asynchronous Receiver Transmitter (USART) program.
hex
- 本程序基于USART协议，向STM32板上烧写程序，新手向，参数修改在rs232.cpp中，还有要烧的文件名在abccDlg中修改，望大家共同学习-This procedure is based on the USART agreement to the STM32 board programming procedures, novice, parameter modification in rs232.cpp, as well as modify the file name to burn i
USART
- Code samples for accessing USART.
RTC
- RTC的时钟设置和显示,通过秒中断功能，在LED1(GPIO_Pin_0)上以2s为周期闪烁，并以1s为周期通过USART送出时间信息 （在串口调试软件上以24小时时间制显示）-RTC clock setting and display by seconds interrupt function in LED1 (GPIO_Pin_0) the 2s cycle flashes and sent via USART 1s cycle time information (In 24-hou
NewSTM32F4xx_uCosII
- 基于STM32F4的ucosII移植程序，包含在ucosII下的DMA USART串口发送程序，无CPU干预，直接通过DMA向上位机发送数据！-Based STM32F4 of ucosII transplant procedures contained in ucosII the DMA USART serial transmission program, without CPU intervention, directly by the DMA to send data up crew!
Serial-loop-transceiver-20130915
- stm32串口循环收发 并采用中断方式 大大提高串口效率-stm32 usart Serial loop transceiver
UCOSPCANPUSARTPLED
- STM32基于UCOSII的CAN+USART+LED三任务程序。-STM32 UCOSII of CAN+USART+LED three task-based program.
DEV_Pro_usart2_IT(ucos)
- STM32 usart中断方案，用于串口中断输入,带有ucos操作系统-STM32 usart2 INTERRUPT
USART
- stm32l152串口发送程序，以中断的方式，发送一串字符串-stm32l152 serial transmission program, to interrupt the way, sending a bunch of strings
M3uCOSIILED
- STM32开发平台植入UCOSII系统，LED，USART-STM32 development platform implant UCOSII system, LED, USART
BSP
- stm32吧can转接成usart can里面包含初始换 速率500kb/s usart 19200(The stm32 bar can be converted to usart which can contain the usart 19200 with an initial conversion rate of 500kb / s)
zkongzcx
- 基于STM32F103RC的中控控制代码，完整的代码注释，可定时控制继电器关机，一键开机，串口通信，IIC音量控制，完整的Keil uVision5工程，使用ucos系统创建，按钮、串口、看门狗任务(STM32F103RC based central control code, complete code annotation, timer control relay shutdown, one button start, serial communication, IIC volume con