搜索资源列表
KLED
- 实验板有4个按键，4个LED灯。当按下K1时，流水灯以1秒的速率流动，按下K2时，以5秒的速率流动，按下K3时从向至下流动，按下K4时，从下至上流动。当重复按下按键时，保持功能不变。 -The experimental board has four buttons, four LED lights. Flow from the bottom, press K1, light water flow rate of 1 second, press K2, the rate of flow of
GPI474O
- 本例程主要测试LED和KEY，当程序运行时，LCD屏上会显示： STM32F10x DEMO GPIO TEST 按键K1-K4控制灯闪动的次数： 按k1,L1,L3各闪1次 按k2,L1,L3各闪2次 按k3,L1,L3各闪3次 按k4,L1,L3各闪4次 -The main routine test LED KEY, when the program runs on the LCD screen will display: The STM32F10x DEMO
K1-K4-packet-control-LED
- 每次按下 K1 时递增点亮一只LED，全亮时再次按下则再次循环开始， K2按下后点亮上面4 只LED，K3 按下后点亮下面4 只LED，K4 按下后关闭所有LED-Each press K1 increments lit a LED full brightness when pressed again, the cycle begins again after 4 LED lit above press K2, K3 Press lit following four LED K4 Press
long
- 本例程为四键控制时钟，k1键按下后进入时钟的调整状态，k2按下时钟上 k3按下时钟下调，调好设定的时钟后按下k4时钟进入走时状态-This routine four keys to control the clock, enter the clock adjustment of status in the k1 key is pressed, the K2 Press clock K3 press the clock down, press k4 clock into go after a go
PIC16FXXmain
- // 名称: EEPROM数据访问与数码管显示 //----------------------------------------------------------------- 说明: 本例运行时,按下K1将向EEPROM中写入0x00~0x0F,按下K2时写入16个 随机字节,按下K3时读取EEPROM中的32个字节并逆向循环显示.-//Name: EEPROM data access with digital display//--------------------
UsbKeyboard
- USB开发—模拟 键盘 请按K1-K8分别进行测试 K1:光标左移 K2:光标右移 K3:光标上移 K4:光标下移 K5:滚轮下滚 K6:滚轮上滚 K7:鼠标左键 K8:鼠标右键 -USB development- simulated keyboard press K1-K8 were tested K1: cursor left K2: cursor right K3: Move cursor K4: cursor down K5: W
UsbMouse
- USB开发——鼠标 K1:光标左移 K2:光标右移 K3:光标上移 K4:光标下移 K5:滚轮下滚 K6:滚轮上滚 K7:鼠标左键 K8:鼠标右键-USB development- mouse K1: cursor left K2: cursor right K3: Move cursor K4: cursor down K5: Wheel Scroll K6: rollers roll K7: left mouse button K8: R
long
- 三个功能键，当上电后，系统显示提示符P。按下k1后，系统开始正常运行，此时按其它键均无效当再按下k1后，进入调秒状态，按k2加1,按k3减1,再按一下k1进入调分状态，再按一下，进入调时，再按一下，进入正常的运行状态在调整状态下，当调整该位时，该位会闪烁-Three function keys, when the power on, the system displays the prompt P. After pressing k1, the system starts running, t
Lock
- 用STC单片机，实现4个数字4位密码锁的功能，并显示在数码管上。具体如下K1,K2,K3,K4,键分别代表数字1，2，3，4，K5为确认键，如果输入用户存放的正确密码，则单片机上的LED实行循环亮灭功能，如输错了3次,LED等则全亮。- Use of STC to achieve four digits 4 lock function, and displayed on a digital pipe. Follows K1, K2, K3, K4, representing key figu
main
- 静态数码管实验。按下K1键，显示0，按下K2键，显示9，按下K3键，显示减1，按下K4键，显示加1。-Static digital tube experiments. Press K1 key to display 0, press K2 key to display 9, press K3 key to display minus 1. Press the K4 key to display add 1.
main
- 步进电机实验。电机用P1口,键盘使用P3.0、P3.1、P3.2、P3.3。按下K1键，顺时针转，按下K2键，逆时针转，按下K3键，低速，按下K4键，高速。-Stepper motor experiment. Motors P3.0, P3.1, P3.2, P3.3 of P1 port, keyboard. Press K1 key, clockwise, press K2 key, turn counterclockwise, press K3 key, low speed, press