搜索资源列表
U51asm
- 交通灯： 1. 因为本设计是交通灯的控制，所以要先了解实际交通灯的变化规律。假设一个十字路口为东西南北走向。初始状态0为东西红灯，南北红灯。然后转状态1南北绿灯通车，东西红灯。过一段时间转状态2，南北绿灯闪几次转亮黄灯，延时几秒，东西仍然红灯。再转状态3，东西绿灯通车，南北红灯。过一段时间转状态4，东西绿灯闪几次转亮黄灯，延时几秒，南北依然红灯。最后循环至状态1。 2. 双色LED是由一个红色LED管芯和一个绿色管芯封装在一起，公用负端。当红色正端加高电平，绿色正端加低电平，红灯亮；红色正端加低
J32-3320_
- IO程序 - 交通灯演示程序,采用中断驱动模式。① 南北路口的绿灯，东西路口的红灯同时亮30秒。 ② 南北路口的黄灯闪烁3次，同时东西路口红灯继续亮。 ③ 南北路口的红灯，东西路口的绿灯同时亮30秒。 ④ 南北路口的红灯继续亮。同时东西路口的黄灯闪烁3次。 ⑤ 转 ① 重复注：黄灯的每次闪烁亮0.5秒，熄0.5秒。- The IO procedure - traffic light demonstration program, uses the severance actuation pat
159
- 路口分主干和支干道，主干道的绿灯时间（为２５秒）长红灯时间短（为２０秒），支干道的红灯时间长（为３０秒）绿灯时间短（为１５秒），黄灯时间相等（为５秒）！ 用P1口控制红绿灯，用P0和P2显示时间！ 程序还没有优化，还望各位老师多多指点！ -junction trunk and branch-trunk Road green time (for 25 seconds) long red light a short time (20 seconds), Support corridors
VGA_PLL
- alter fpga vga扫描时序源码,来源于红色飓风开发板.-alter fpga vga sequential scanning source code, and from the red hurricane development board.
T-Tris
- This Tetris-Clone was assembled from one ATmega8, 240 red LEDs, a few BJTs, a few IC s and some push-buttons.
ILI9481P3.5
- tft3.5显示程序，驱动IC为ILI9481，可以显示红、绿、蓝以及灰阶色彩的显示。-tft3.5 display program, driver IC for the ILI9481, you can display the red, green, blue and gray color display.
red
- proteus红外遥控模拟用8051单片机，ProteusDSN文件和keil C程序-proteus simulation with infrared remote control 8051, ProteusDSN keil C program files and
IR_Learn
- This IR (Infra-Red) learn module for home automation system. It can learn IR codes from different IR remotes, and then execute any assigned actions controlled by learned IR remote. This project was developed using Keil 8051 compiler. Proces
234
- 1）每个街口有左拐、右拐、直行及行人四种指示灯。每个灯有红、绿两种颜色。自行车与汽车共用左拐、右拐和直行灯。 -1) are left in each corner, turn right, go straight and four pedestrian lights. Each lamp has red, green and white. Bicycle and car sharing left, right and straight lights.
irrecorder
- 红外线遥控器记录和回放测试程序源码，外部硬件相当简单。-Infra-red remote control recording and playback of test procedure
Cristmas_LED
- 设计逆变式LED彩灯控制系统的目的，主要是解决目前市场上的彩灯只有220V供电，且彩灯的色彩单一，移动性能差的状况。本系统采用3V干电池进行供电，具有良好的便携性能。此外，我们将LED彩灯分成红、绿、蓝三种颜色的，通过这RGB颜色的变化以及PWM脉宽的调节，可以调制出各种各样不同的颜色。为了实现彩灯的串联，我们还将3V电压升至34V。彩灯的颜色以及式样的控制则由单片机进行控制。-LED lantern design inverter control system seeks to solve t
irmouse-00.20
- infra red mouse source code
traficlight
- avr单片机，通过数码管和led小灯实现交通灯，在15秒小灯变红（通过不同小灯亮表示），倒计时-avr microcontroller, digital control and led by a small lamp to achieve the traffic lights, small lights red in 15 seconds (indicated by different small lights), the countdown
7318_ctrl_v13
- TDA 7318 sorce and hex file for atmega 8515 2X16 LCD and infla red
huamian
- 驱动240*320TFT—LCM显示画面，画面分别为红，绿，蓝，白，黑，黄，橙，紫，青-Drive 240* 320TFT-LCM display, the screen was red, green, blue, white, black, yellow, orange, purple, blue
caise
- 驱动240*320TFT—LCM分别显示画面彩条和窗口画面， 彩条：由左到右分别是红，绿，蓝，黄，橙，白，黑 窗口：中间有一块黑色画面，四周为灰色画面-Drive 240* 320TFT-LCM, respectively, and the window display of color images, color bar: from left to right are the red, green, blue, yellow, orange, white, black window:
jiaotongdeng
- 交通灯控制器源代码：模块，时钟输入，复位输入,红灯输出，绿灯输出，黄灯输出，七段码管显示输出，七段码管扫描驱动-Traffic light controller source code: the module, the clock input, reset input, output red light, green light out, the yellow light output, seven segment display output tubes, seven segment disp
IRController
- Infra red controller
Led_Fire
- 6 Leds (3 yellow, 3 red) connected to Port C are driven to flicker like real fire
red-logic-Slave-FIFO_USB
- 红色飓风开发板程序 Slave FIFO_USB， cy68013加FPGA源码，完成USB通讯 -Red hurricane development board procedures the Slave FIFO_USB, cy68013 plus FPGA source code, complete USB communication