资源列表
pwmRC_SERVO
- 关于用PWM控制舵机的好资料，直接复制即可 SYSCLK=12MHz PCACLK=1MHz与系统时钟48MHz,PCA时钟4MHz,PWM周期70Hz,需要0x37CE*4=0xDF36个PWM周期,计数递增到0xFFFF后溢出-PWM control on the steering gear with good information, you can directly copy the SYSCLK = 12MHz PCACLK = 1MHz and the system clock
LED_6
- 左右跑马灯，用51单片机实现led灯分别从左和右开始顺序闪烁-the led light on from the left and the right in order
qq
- 8155 键盘及显示接口 使TDN-MI叫教学实验系统-8155 keyboard and display interface that TDN-MI experimental system called the Teaching
1
- 这是一个使用51单片机加上L298驱动直流电机的程序源代码。-This is a single chip using 51 L298-driven DC motor with source code.
zhiliudianji
- 直流电机程序 开发环境 单片机编程软件。-DC motor program development environment microcontroller programming software.
adda
- 89c51的单片机，D/A和A/D联合转换，并用数码管显示转换值-89c51 microcontroller, D/A and A/D co-conversion, and conversion values with digital display
key2
- 用独立按键P3^2控制数码管,每按一次数码管加一，最高加到999后-Independent keys P3 ^ 2, by a digital pipe plus a maximum added 999
yangbin
- 键盘控制小灯亮灭。按一次键盘，LED屏显示1，两次显示2；1的时候小灯亮的顺序是循环亮-keyboard controll the LED
miao
- 这是一个atmega16单片机秒表程序，4位数码管显示，0至60.-This is a the atmega16 a microcontroller stopwatch program, four digital display, 0-60.
lab_4
- 并行口实现数字0~9、A~F、L、U、P、n总共19个键盘，将按键的结果用4位数码管（例如：7SEG-MPX-CA-BLUE）显示（可选——按键控制移位）出来。-Parallel port of the numbers 0 to 9 and A to F, L, U, P, n a total of 19 keyboard, the keys with the four digital tube (for example: 7SEG-the MPX-CA-BLUE) (optional- but
max543
- max543 14位DA驱动程序包，单片机实现-max543 14-bit the DA driver package, MCU
honglvdeng
- 简单的控制LED，实现红绿灯的显示流程。-Simple control LED, to achieve the traffic light display processes.