资源列表
ST7781_CPT2.4_InitCode_090309.
- ST7781配2.4"TFT CPT的初始化代码,ST7781 initial code for TFT CPT panel
add128
- 128位的地址译码器，在cpld或者fpga上实现兼可-128-bit address decoder, in the CPLD or FPGA implementation and may
paobiao
- 1)利用51单片机作为主控制器组成一个电子跑表，采用4位LED显示器。 2)上电或RESET后显示000.0。 3)当按下START键时，作为跑表使用，显示范围是：000.0-999.9秒，当按下STOP键时，跑表停止运行，并保留所停位置的时间显示不变。-1) the use of 51 single-chip microcomputer as the master controller of an electronic stopwatch, the four LED displays.
floating_point_verilog
- verilog写的浮点运算加法，希望对大家有用处-verilog to write floating point addition, we want to be useful
lesson782
- C源代码，风格值得引用与学习 。-IT IS VERY GOOD.
STM32-ADC
- 使用STM32F103 ARM CORTEX-M3内核CPU进行ADC读取，涉及STM32控制及AD采样内容。-Use STM32F103 ARM CORTEX-M3 core CPU for ADC reading, involving STM32 control and AD sample content.
Guanggaodengdeyudong
- 基于51单片机的广告灯的移动，项目设计，帮朋友的店面设计的广告灯移动显示，已经调试可以很好运行-
lcd
- LCD initialisation code
pwmm
- 通过改变占空比，实现8个流水灯渐亮渐暗的功能-By changing the duty cycle to achieve the eight water lights fade function fades
my_VGA
- FPGA驱动VGA显示，通过验证，需要的可以下载。verilog实现-VGA display driven by the FPGA, through validation, need can be downloaded. verilog implementation
PWM-LED
- 根据输入电压改变pwm来调节LED输出光。-adjust PWM to dim LED according to input voltage.
baseon_avr_mega48_step_drive
- 用于avrmega48单片机上控制步进电机的程序，加速方式为s曲线-used for avrmega48 to drive stepmotor