资源列表
74HC595_led.rar
- 两片74HC595级联，形成16位并行数据输出。控制8个数码管显示。显示刷新周期为2ms。 单片机只需3个I/O口发送串行数据到74HC595即可。程序用c51编写。,74HC595 2 cascade, the formation of 16-bit parallel data output. Control of 8 digital tube display. Display refresh cycle for 2ms. Only three single-chip I/O port to
ex02.c
- 输入一个整数，求该整数的二进制表达中有多少个1-Enter an integer, find the binary representation of the integer number 1
AD_tlc1549
- ti公司ad芯片tlc1549的源代码，参考电压为5v,将测得电压转换后发送到串口。-ti ad-chip tlc1549 company' s source code, reference voltage is 5v, the measured voltage is converted and sent to the serial port.
001
- 定义了一个临时数据段，用于存放GDT的界限和32位地址，然后用sgdt把GDTR保存到这个临时数据段-design a temp data segment for save GDT size and 32 bit address, then save GDTR to this segment by sgdt...
virnet
- 网卡中，dm9000的驱动编写程式，和具体的编写流程-dm9000 driver
LEDjianbian
- LED渐变程序值得一看哦！ -very good!very good!very good!very good!
pwn_1
- C8051F340的PWN程序,里面有中文注释-C8051F340' s PWN program, which in Chinese Notes
altera
- altera epm7128 for cpld coding program
EEPROMRW
- AVR 读写eeprom.字，字节，字符串应用-avr read from eeprom and write into eeprom,byte,word,strings.
spn
- SSTF算法操作系统实验SSTF算法实验源代码轻松完成实验-SSTF algorithm SSTF algorithm experiment experimental operating system source code to easily complete the experiment
systimer
- ADG706 is a low voltage CMOS Analog Multiplexers, built 16 single-channel. It according to the address identified by the 4-bit binary address lines A0, A