搜索资源列表
UC-OS-TCP-IP-PPP
- UCOS下添加TCP/IP和PPP协议,实现TCP,UDP点到点等功能.-UCOS Add TCP / IP and PPP, TCP, UDP point-to-point functions.
uCOS-IIICATMEGA128.RAR
- uCOS-II操作系统移植到AVR单片机ATMEGA128上的实例源码。uCOS-II是一个实时多功能操作系统The Real-Time Kernel-uCOS-II add to ATMEGA128 The Real-Time Kernel system
UC-OSII
- 在windows环境下可用的UC/OS学习系统，可以自行添加任务或者修改系统文件，然后执行文件以观察结果，很好用的源代码+仿真合集哦-Available in the windows environment UC/OS-learning system, you can add their own tasks, or modify system files, and then execute the file to see the results, the good collection of s
USART
- 使用ST标准库，加载uC/OS II,添加3个任务，通过串口输出CPU使用率的C源代码。CPU为STM32F103RBT6，串口为USART1-Using the ST standard library, add uC/OS II, add three missions, through the serial output of CPU utilization of C source code. CPU is STM32F103RBT6, serial for the USART1
UCos-II.core.analysis.Transplantation.and.Driver.D
- 《uC/os-II 内核分析.移植与驱动程序开发》随书光盘中的全部源代码，全部通过调试。书中介绍μC/OS-Ⅱ的内核分析、移植过程和驱动程序开发方法。书中首先以μC/OS-Ⅱ在8051系列单片机上的移植为例子，详细剖析μC/OS-Ⅱ的内核和移植过程；然后以串口通信为例，介绍如何为μC/OS-Ⅱ实时内核添加设备的驱动程序；最后介绍μC/OS-Ⅱ在数字信号处理器[DSP]上的移植，以使读者进一步加深对μC/OS-Ⅱ的理解。 -" UC/os-II core analysis. Transpl
uCOSTransplant20110930
- TI Cortex M3 LM3S9BXX系列，uCOS-2.89移植后的工程，添加自己的应用程序即可工作，编译环境为IAR 5.50版本。-TI Cortex M3 LM3S9BXX series, uCOS-2.89-transplant project, add your own applications can work, the compiler environment IAR 5.50 version.
uCOS-II
- ucos的移植试验，只包含了移植代码，需要在文件中添加ucos的内核代码，详细参照readme.txt文件-uCOS transplant experiments, the graft contains only the code needed to add in the paper uCOS kernel code, detailed reference to readme.txt file
ucost1
- sst51单片机，已经成keil51的模板，只需添加任务即可。-sst51 single-chip, has become keil51 template, simply add the task can be.
ucosArmTest
- 程序展示了 ucos在EASYARM2200上的移植。并添加了多个设备在UCOS下的驱动UART:SPI:IIC:ZLG7290.当然还没有完全完成板上其它设备的驱动。由于限制，没有附UCOS的源码部分！-UCOS procedures demonstrated in the transplant EASYARM2200. And add a number of equipment under the driver uCOS UART: SPI: IIC: ZLG7290. Of course,
MiniGUI-STR_uCOS
- MINIGUI 加UCOS 很好的源代码 找了好久才找到了 拿出来与大家一起分享！-MiniGUI uCOS add a good source to find for a long time to find the show to share with everyone!
STM32_RTOS
- 基于STM32的RTOS例程。本移植使用的是 ucosⅡ 2.83版本，需要在OS文件夹下添加的操作系统源代码包括如下文件： os_flag.c os_mbox.c os_mem.c os_mutex.c os_q.c os_sem.c os_task.c os_time.c os_tmr.c os_core.c-RTOS routines based on the STM32. Transplantation using the uc
LPC2470_ucosii
- 实现最新的uc/os嵌入式操作系统在LPC2470系列上面的移植（添加了定时器的管理代码）；-The latest achievement of uc/os in the LPC2470 family of embedded operating systems above the graft (to add a timer management code)
uCOS51shell
- ucos shell的程序讲解，UCOs 只提供了内核，自己要添加文件处理，网络接口等 -ucos shell on the procedures, UCOs provided only kernel you want to add their own document processing, network interface, etc.
lwip_ucos
- 硬件平台LPC2294pc加rtl8019。软件平台是ucos-ii加lwip。-Hardware platform LPC2294pc add rtl8019. Software platform is ucos-ii plus lwip.
ucos2.88_SVC_STM32
- 看到USOS官方和网上很多基于Cortex-M3内核的移植，任务都运行于特权级，并没有充分发挥Cortex-M3用户级和特权级的保护功能，本文件的移植用户级和特权级是分开的，用户任务程序完全运行在用户级，用户级下需要操作中断等特殊要求，都在SVC系统调用函数中实，也可以方便的添加自己的SVC系统调用。-Many official and on-line to see USOS Cortex-M3 core-based migration, the task runs in the privile
2410-SLib
- 包含在ucos系统里要用到的mp3播放库，只需要在写ucos程序时添加即可调用-Included in the ucos system in use to the mp3 player library, simply add the write ucos program can call
uCOSII_Middleware_Rs232Diver
- 周立功公司的uCOSII串口驱动中间件，请自行添加uC/OS-II 2.52的源代码-ZLG uCOSII serial driver middleware, please add their own uC/OS-II 2.52 of the source code! !
uCOSII_MODEM_DIVER
- 周立功公司提供的uCOSII操作系统下的MODEM中间件，移植时请自行添加uCOSII源码-Zhou, who provided the MODEM uCOSII middleware operating system, transplant source, please add their own uCOSII
LPC22XX_CAN
- LPC22XX系列芯片中CAN控制器驱动代码，添加了帧ID表格的软件写入。可以在接受数据帧时筛选-LPC22XX series chip CAN controller driver code, add a frame ID table in software. You can accept the data frame filtering
UCOS
- 在8051中实现分时操作，架构已经写好了！只需在标记的地方添上你要执行的程序就OK了-Implement time-sharing operation in 8051, architecture has been written! Just add the tag where you want to run the program on the OK