资源列表
sram_test
- is61lv25616简单的verilog程序，完成sram读写-is61lv25616 simple verilog program, complete sram read and write
BASYS2_CLOCK
- 基于xilinx basys2开发板 实现数字钟功能-Development board based on xilinx basys2 digital clock function
DDS_dac9764
- verilog语言编写的DDS信号源，采用DAC9764-verilog DDS signal source language, using DAC9764
select1
- 用VHDL语言实现多路数据选择器，测试仿真通过-VHDL language with multi-channel data selector, test through simulation
dds_double_new
- FPGA用verilog语言编写的 dds程序，两路输出，频率可调，相位可调，输出波形可调-FPGA using verilog language dds program, two outputs, adjustable frequency, phase adjustable, adjustable output waveform
zs
- 基于fpga的数字频率计，verilog编写，可修改闸门宽度0.1s/1s/10s，可测频率1hz~1mhz，包含整个工程，内部分频模块为了仿真方便改小了，后面注释为50mhz晶振下的分频值，可根据需要自行修改-Fpga-based digital frequency meter, verilog prepared to modify the gate width 0.1s/1s/10s, measurable frequency 1hz ~ 1mhz, contains the entire
DDS
- DDS信号源实现源码，实现正弦波、方波、三角波等，频率、相位可调。-DDS signal source to achieve source
Cpld
- 本程序是用verilog语言在CPLD上实现智能小车控制部分，并通过并行通信，实现与单片机的通信。-This program is to control the robot car,and comunication with the C8051FXX by the Parallel communication.
pwm_led
- 基于FPGA的PWM控制LED灯的verilog程序源代码-FPGA-based PWM control of LED lights verilog source code
MOTION_DECT
- 在EP3C16 FPGA开发板上实现了对数字摄像头的数据采集，颜色空间变换并进行摄像头中的运动物体进行检测，并实时的显示在VGA显示器上。使用quartus 10.0打开，注意不要使用中文路径。-In EP3C16 FPGA development board to achieve the right digital camera for data acquisition, color space conversion and for the camera to detect moving ob
verilog-codes-for-booth2
- 由verilog编写的采用booth2编码的16*16乘法器-a 16*16 multiplier with booth2 coding by verilog
stopwatch-VHDL
- 自己用VHDL语言写的一个秒表程序，包括秒，分秒和百分秒。有程序说明和VHDL代码，一看就懂-Own use VHDL language used to write a stopwatch program, including the seconds, minutes and seconds and hundredths of a second. There descr iption of the procedures and VHDL code, one can understand